Aluminum Channel Weight Calculator
Channel in Aluminum: use the calculator for an instant mass estimate.
Aluminum Channel: tons to meters
Use “Calculate length (meters per ton)” to solve stock length from total mass while keeping the same section model and grade density.
型钢 (铝) — weight from dimensions
Enter all dimensions including length — estimated weight updates instantly.
Weight
7.357
kg
Standards & codes
Reference information
Commonly cited families (verify edition on your certificate):
- EN 10365 UPN
- ASTM A6
- GOST 8240
U-channels are listed in EN 10365 (UPN), ASTM A6 (C/MC-shapes), and GOST 8240. Tapered flanges and fillets differ between mills; verify against the producer’s rolling schedule for tender quantities.
Weight table
Reference: weight per meter
Illustrative values for common sizes of Channel at the density you selected. For procurement, always verify against mill certificates.
| Height (mm) | Flange width (mm) | Web (mm) | Flange t (mm) | kg/m | |
|---|---|---|---|---|---|
| 160 | 82 | 5 | 7.4 | 5.237 | |
| 200 | 100 | 6 | 8.5 | 7.357 | |
| 240 | 120 | 6 | 9.8 | 10.04 |
Figures follow the same geometric model as the calculator above; rounding and simplifications apply.
Method
How to calculate weight
Core model
Same section engine as symmetric I-beam (approximation for UPN mass/m).Field names
Channel (U-section) estimates here follow the same symmetric I-beam volume engine as a stand-in for quick SEO-friendly mass checks (channel weight per meter, UPN kg/m). Replace with CAD or handbook values for tender work.
Always cross-check flange slope and fillets on rolled channels when margins are tight.
常见问题
估算精度、离线与 MetalCalc Pro 应用