Copper Square tube Weight Calculator
Square tube in Copper: use the calculator for an instant mass estimate.
Copper Square tube: tons to meters
Use “Calculate length (meters per ton)” to solve stock length from total mass while keeping the same section model and grade density.
वर्ग पाइप (तांबा) — weight from dimensions
Enter all dimensions including length — estimated weight updates instantly.
Weight
5.053
kg
Standards & codes
Reference information
Commonly cited families (verify edition on your certificate):
- EN 10219
- EN 10210
- ASTM A500/A501
- GOST 8639
- GOST 8645
Hollow structural sections fall under EN 10219 (cold-formed), EN 10210 (hot-finished), ASTM A500/A501, and GOST 8639/8645 for square/rectangular tubes. Corner radii and corner reinforcement in rolled sections are not modeled in detail here.
Weight table
Reference: weight per meter
Illustrative values for common sizes of Square tube at the density you selected. For procurement, always verify against mill certificates.
| OD (mm) | Wall (mm) | kg/m | |
|---|---|---|---|
| 40 | 3 | 3.978 | |
| 50 | 3 | 5.053 | |
| 60 | 3 | 6.129 | |
| 80 | 4 | 10.895 |
Figures follow the same geometric model as the calculator above; rounding and simplifications apply.
Method
How to calculate weight
Core model
V = (s² − (s − 2t)²) · L
m = ρ · VField names
Hollow square tubes use outer square minus inner square for area, then area × length × density—common for square hollow section weight and SHS kg/m lookups.
Wall thickness must stay consistent on all four sides for the model to stay accurate.
अक्सर पूछे जाने वाले प्रश्न
अनुमान, ऑफ़लाइन और MetalCalc Pro ऐप्स